Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

The strongest 3pt. wire winders on the market today. Over 13,000 in use world wide.
The ball valve is your variable speed control. Smooth-operating valve allows you to easily select any
speed from fast down to crawl, as well as a complete stop. Wire winder's hydraulic motor provides
ample power for hard jobs like pulling barbed wire through tall grass.

Always regulate speed of this unit from the hydraulics on tractor. Always plug valve hose into power side of hydraulics.

• Designed for smooth or barbed wire or light cable.
   

• Category 1,2, or 3 point mount (special orders upon request)
   

• Removable reel that splits to unload wire.
   

• Holds 1/2 mile barbed or 1 mile smooth wire.
   

• Replaceable moly impregnated polyethylene bushings on shaft to prevent wear. This bushing has proven to last for years of performance in the field.
   

• Hand spun steel cone splitting reel, designed with safety in mind.

This reel is designed for 3 tie wires to assure no spreading of the wire when taken off the cone.
Place these wires on the reel prior to start up. Our products are proven rugged. Long life,
replaceable bushings prevent wear to steel parts.

Shown with wire rolled and end plate removed. Tie wires in place and ready to pull wire from reel. Finished rolls from the Pro-Tatch wire winder are tight, compact & easy to handle.

The hydraulic design allows you to start slow, speed up or slow down. No more jerking and breaking wire, etc.   Simple to use: Just park tractor in one spot, tie a weight on the end of the wire and begin pulling toward you.   When the reel is full, tie the roll with 3 tie wires used on the 3 different positions of the reel. Then split the reel and take the tied roll of wire off the reel.

Category 2 winder (shown above) is on display in our showroom in Grand Island, NE.

Click Here for Wire Winder Assembly Instructions

Call Toll Free 1-877-407-8645 Today For Any Questions Or To Order Your Wire Winder.

"I have been handling ProTatch Wire Winders in Australia for 15 years. I am always very happy with the
ProTatch product line and have never had any issues with quality or customer service. I have sold over
200 units in Australia and can be reached at 0116733753899 or by email at nalawholdings@bigpond.com."

~ Tom Thompson, Nalaw Holdings in Toowong, Australia

************************

Solid Reel

This reel has a 4" center tube. We also offer an  8" center tube for high tensile wire. This can be added to any Pro-Tatch wire winder. (Design leaves wire on the reel.)

Part Number	Price
NS-1754	$69.00 delivered
NS-1758	$74.00 delivered

Shipping included on purchases within
the U.S. Continental 48 States. Call to purchase
outside the U.S. 877-407-8645.

Optional Arm

Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

Optional arm designed for unrolling new rolls of wire. This arm can be added to any Pro-Tatch wire winder. Easily adapted to ATV's, Pickups, etc.

Magnum Series Wire Winder

Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

Roll multiple strands with our all new 3 Point Magnum Series Wire Winder.

• This unit is designed to pull 1 to 4 strands at once.

• Excellent for those big cleanup jobs where saving the wire is not important.

• The Magnum Series also works fine for a single strand of barbed or smooth wire. It works exactly like our original Wire Winder.

• Need to roll up a full mile of barbed wire? Or two miles of smooth wire?

• UPS Shippable.

Part Number	Price
WW-175	$949.00 delivered

***********************************************************

Bale Bed Wire Winder

Bale Bed Unit has all the same capabilities as the 3 point units.

This unit mounts on the arm of the hydraulic bale beds that are used on so
many farms and ranches. The one shown above is one of a few different mounts
that we can do to make this unit work on your bale bed arm.
Our mount will fit over your arm after the bale spike is removed
and you will hold it on with a 1" pin back through that hole.

When ordering this unit please give us the outside measurements of
the bale bed arm. And also we need the distance of the hole in the
end of the arm from the end to the center and its diameter.
Usually it will be 1" diameter and be located 3" from the end of the arm.

Part Number	Price
BWW-1	$749.00 delivered

Shipping included on purchases within
the U.S. Continental 48 States. Call to purchase
outside the U.S. 877-407-8645.

***********************************************************

Magnum Universal Mount Winder

Performs exactly like our 3 point mount Magnums, but with a different mount. This uses a 16" square 1/4" plate with 4 mounting holes punched, one in each corner that can be adapted to mount on many different applications. We see many of these being used on skid loaders, bolted to buckets of loaders, flatbeds on pickups etc. This is a great unit to be used as a cleanup winder also. The reel splits in the center by pulling it apart after the reel is full.
3-tie wire locations on the reel for easy unloading 3/4" bearing keeps everything level and prevents bending problems End plate removes easily when you are ready to unload a full reel of wire No sales tax for nebraska residents will be added. Part Number Price MU200 $949.00 delivered Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

***********************************************************

Dave Fintel from Deshler, NE has been using one of our hydraulic wire winders for years.
He says he cannot be happier with the way it works. Using hydraulics to roll wire beats gas motors
and PTO units every time since you can regulate the speed so much better.
Thank you for your great service and excellent product!

***********************************************************

Replacement Seal Kits

Replacement seal kits are available for the older Protatch Wire Winders.

 

Part Number	Price
SWW-1	$52.00 delivered

Shipping included on purchases within
the U.S. Continental 48 States. Call to purchase
outside the U.S. 877-407-8645.

***********************************************************

 

Universal Hydraulic Winder

Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

This unit can be used in many applications. We see it most commonly used on skid steers, loader buckets, or bale mover pickups. You can mount it anywhere you have hydraulics.

• Dimensions: 16" x 16" x 1/4" Mounting Plate.

• 1/2" Mounting Holes In Corners For Mounting.

• Unit Comes Complete With Reel, Hoses, Valve, Shaft, Lovejoy Couplers, and Motor. (Not Shown)

• This Unit Functions Exactly The Same As Our 3-Point Model. The Only Difference Is The Mount Shown Above.

• This is the complete universal wire winder you will recieve unless you just need the framework only.

  All components from 3 point mount will interchange with this unit.

Part Number	Price
WWUM-616	$749.00 delivered

******************************************

Universal 3-Point System

With this new package it is posible to use your new winder as a 3-point on the tractor or you can unbolt the motor arm from that mount and bolt it to your universal plate to be mounted in a multiple of ways. The Universal has become very popular and this system gives you more options when using your new Pro-Tatch Wire Winder. With this package you will recieve everything shown in the above picture which includes the 3-point mount along with the universal mount and all the hardware including the yellow split reel. Here is the Universal and the 3-Point mounts being shown placing the motor arm into each mount. This system is what makes it possible to use your winder for either a tractor mount or a universal plate mount. Part Number Price U3P1 $1049.00 delivered in 48 states (delivery outside US additional cost) Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

Universal Hydraulic Winder - Mount Only

Mount for Universal Winder may be purchased separately. Part Number Price UWF $279.00 delivered Shipping included on purchases within the U.S. Continental 48 States. Call to purchase outside the U.S. 877-407-8645.

Custom Mount

Hydraulic Wire Winder - over 13,000 manufactured and in the field.
ProTatch is the First Name in Wire Winders.

Please call about any questions on special mounting of the wire winders shown
or wire winders designed for any size operation.



Here is an old handmade wire winder I took a picture of this fall in central, NE.
Send us a photo of your homemade wire winders so we can see what has worked for you.
Click here to email us.

T-Post Products

T-Sign Our weather resistant T-Signs can be used to identify electrical lines, gas lines, and emissions. Mounting tie wraps are included with purchase.		Mounts easily on most T-Posts Adapts to plastic or metal signs of any size Part Number Price LP8147 $12.95
---------------------------------------------------------------------------------------------------
	Part Number Price LP8007 $12.95	T-Post Gun Rack Fits over freestanding t-post Holds 8 guns Promotes gun safety Weather resistance ABS plastic To enhance appearance, use 2” diameter white PVC pipe to slide over the top
Scott Renz (in the gray t-shirt) with his dad and 2 boys and grandchildren. Scott took this old rusty Oliver 77 that his dad bought new in 1951 and restored it on his spare time. Scott is the guy who stands back there chewing on a cigar and builds wire winders everyday and has for the past 15 years. He is a great asset to the company.
We'll Make You a Great Deal! Hunting Stand Base These reject small prototype boat floors make excellent bases for tree stands. Can be painted! When you use aluminum for your base it will last as long as the tree! Not like the wooden type most hunters use that need to be rebuilt every 3-4 years. You will find these very easy to mount in a tree with a little extra bracing. We have 5 different pieces and they will be sold at a cut rate price to just move them. Call for pricing. We want these outta here! Sizes are ( 2) 30" x 57" / ( 1 ) 6'5" x 30" / ( 1 ) 4' x 5" / (1) 4' 9" x 20". All are aluminum floors except for one of the smaller pieces which has a plywood floor.
Here is a picture of employee, Scott Renz rebuilding our old shop truck. It's a 1964 Chevrolet shortbox. Last winter Scott went out of his way to make sure everything he rebuilt on the old truck was correct for the 283 V-8. There is no better man for the job than Scott when it comes to doing these kind of projects.

We have used Bayload.com to ship over 800 boats. If you travel regularly or just need something shipped, check out what Bayload.com can do for you.