| The following
are answers to some frequently asked questions about our 510 Series
Pontoon Boats. |
What
are the overall dimensions of the boats?
The width on all of our 510 Series boats is 5' 7" to the outside
of the floats.
The overall length of the boat and trailer is 19' 6". |
What
is the height of the hitch off the ground?
When the boat and trailer are level, the hitch
is 17 1/2" off the ground. |
How
wide are the access openings between the side rails?
There is a 21" opening between the side
rails for access onto and off the boat from the sides. |
How
much width do the side grab rails add to the boat?
The side grab rails add 7" to each side
of the boat. |
What
are the widths of the pontoons - center to center?
The outboard 12" pontoons are 54"
to the center of the cones.
The inboard 8" pontoons are 34" to the center of the cones.
|
How long are the
pontoons?
The 12' pontoon is 12' 10" tip to tip.
The 15' pontoon is 15' 2" tip to tip. |
How
tall are the handrails?
The handrails are 20" tall. |
How
tall is the deck lip around the edge of the floor?
The deck edging is 3 1/2" tall. This serves
as the framework for the boat, therefore it should not be customized
or compromised in any way. |
What
are the trailer connection specs?
The trailer uses a 2" ball hitch and 4
prong flat rubber electrical connector. |
What
is the maximum hp motor I can use with these boats?
10 hp is the maximum
rating for these boats. You may use either a short or long shaft motor
on our pontoons.
These boats perform great with 4, 5, or 6 hp motors because of the
unique high floatation pontoon design. |
Do you
have directions on assembling the 510 Series Pontoon boats?
Yes, click
here for complete assembly instructions. |
Can
I alter my Pontoon?
Yes, these boats have been used for the water
treatment service industry and have also been customized individually
by our customers. Click here
to see how some of our customers have altered their Hotwoods pontoons. |
| Call
Toll Free 1-877-407-8645
Today For Any Questions. |
