|

15'
Fish-N-Sport Shown With Accessory Wheel Chair Ramp.
Note: As of July 1, 2006 all Shoreland'r Trailers will ship
painted black as shown above. |
|
Space Saving Fold
Away Hinge Kit

16' 6" Total
Length On 15' Boat and Trailer When Folded.
Saves 4' 6"
Of Space!!!

Allows Boat Trailer
To Fit Inside Most Smaller Garages

Folding Hitch
Can Easily Be Added To Any New Or Used Trailer For A Professional
Look With A Design That Hides Manually Cut Surfaces.
Fits standard
3" x 3" Square Hitches

All Mounting Hardware
Included
|
Gross Trailer Weight |
3500 lb. |
|
Class |
Class II |
|
Required Tongue Size |
3" x 3" |
|
Part Number |
Price |
|
HD-TH1 |
$79.00 + shipping |
|
HD-TH1INST |
$149.00 Installed On Trailer |
|
|

Round Live Well
-
Non-clogging filtration system with
protein skimmer
-
Aerates in several places to super oxygenate
the water
-
Quick disconnect pump connection
-
Unit comes with water exchange and fill hose
-
Salt water tough construction throughout
-
No bucketing required
-
Ability to control water temperature
-
Totally portable, can be set up on a dock
or seawall
-
Large lid may be used as a cutting board
-
Can be used on any boat or for transporting
bait in a vehicle
-
Can be used as an extra boat seat
-
Ready to use, no assembly required
-
Can keep all types of bait alive, salt or
fresh water
|
Capacity |
18 gallons |
|
Height |
18 inches |
|
Diameter |
19.5 inches |
|
Dry Weight |
14 pounds |
|
Part Number |
Price |
|
HD-RLW |
$229.00 + shipping |
|
|

Square Live Well
-
Special aerating system that provides maximum
dissolved oxygen
-
Will not create air bubble poisoning or excessive
total gas pressure in the water column
-
Unique filter that is a protein skimmer (removes
feces, suspended solids, and dissolved organics)
-
De-gasses the water column (ammonia, carbon
dioxide, ect.)
-
Pumps water in and out
-
Operates on 12 Volts
-
UV and saltwater resistant construction
-
Fully assembled and ready to use upon delivery
-
Large lid may be used as a cutting board
-
Can be used on any boat
-
Can be used as an extra boat seat
-
Can keep all types of bait alive, salt or
fresh water
|
Capacity |
20 gallons |
|
Height |
13 inches |
|
Width |
13 inches |
|
Length |
29 inches |
|
Dry Weight |
14 pounds |
|
Part Number |
Price |
|
HD-SLW |
$249.00 + shipping |
|
|

Wheel Chair Ramp
Ask
about our handicapped accessible ramp system that can be added to
any of our 510 models.
|
Part Number |
Price |
|
HD-ACC1 |
$399.00 + shipping |
|

Motor Mount Block
This piece can be added to your existing 510 series pontoon boat
or any new one.
Designed to double the area that your transom mount motor clamps
on. Made of super
hard poly plastic to ensure many years of use and will not rot like
real wood.
Water resistant.
|
Part Number |
Price |
|
TMM-1 |
$5.00 + shipping |
|
|

Foot Control Trolling
Motor Bow Mount
This mount is made to accept foot control electric motors. This
unit will bolt to the existing front deck on the Fish-N-Sport 510
15' model. It is not designed for the Lil-Sport 12' model.
|
Part Number |
Price |
|
HD-ACC2 |
$65.00 + shipping |
|
|

Heavy Duty Motor
Mount
This mount is to be used with gas powered motors on the Fish-N-Sport
15' models. This option is now standard on all 15' models and can
be added to your existing 15' Fish-N-Sport boat. This motor mount
bolts to the main body through the existing motor mount to assure
strength and stability for your boating pleasure.
|
Part Number |
Price |
|
HD-MM |
$65.00 + shipping |
|
|

Pedestal Seat
And Mount
|
Part Number |
Price |
|
HD-ACC9 |
$149.00 + shipping |
|
|

All Weather Padded
Seat Cushion
-
All Weather Vinyl
-
Covers Full Length Of
Bench
-
3 Velcro Hold Down Straps
-
Breath Vents To Prevent
Flattening (Holds It's Shape)
-
UPS Shippable
-
Sharkskin Blue Color
|
Part Number |
Price |
|
HD-ACC3 |
$69.00 + shipping |
|
|

Fold Down Canopy Top Fits All Models.
Folds Down Flat To The Rear Of The Boat. All Weather Sharkskin Blue
Vinyl Material. Covers Half The Length Of The Deck.

Shown with protective boot zipped in place. (Boot comes standard
with canopy)
|
Part Number |
Price |
|
HD-ACC4 |
$299.00 + shipping |
|
 
Flush In Floor
Battery Box
Keep your boat battery protected from the elements and safely out
of the way.
Floor battery box is made to work with (2) 12 volt batteries.
Can be purchased in doubles as shown or as a single unit.
Available on the Lil' Sport and Fish-N-Sport Models.
This box is made to work with the
Optima Deep Cell Marine battery available through HOTWOODS.
|
Item |
Price |
|
Battery Box (installed) |
$149.00 |
| Battery
Box (you install) |
$119.00
+ shipping |
|
(Battery
boxes shown above are not included, but may be purchased
separately.) |
(Outside
Battery Mount - single unit) |
Outside Battery
Mount
The Battery Mounts allow your battery or gas tank to sit on the
outside of your boat
leaving you plenty of room for your motor to operate.
Our Battery Mounts can be added to both the 12' and the 15' boat
models.
On the 15' Fish N Sport this allows you to mount your motor directly
to the
transom in the floor, giving you more control while operating your
craft.
This option can be added to your existing boat or add it to your
new order.
|
Item |
Price |
|
OBM12 |
$89.00 (each) |
|
|

Boat cover (Blue shark skin color). Made from highest quality
vinyl available. Shown on Fish N Sport 510 15' model.
|
Part Number |
Price |
|
HD-ACC5 |
$279.00 + shipping |
|
|

Everything you
need to make dull, aluminum boats sparkling clean and shiny.
Protect your investment.
Keep it looking like the day you bought it.
Kit Includes:
|
Part Number |
Price |
|
HD-BC1 |
$44.95 + shipping |
|
|

-
Holds a Bait Caster reel
in a cushioned cradle.
-
A slot in the front of
the rod holder allows for a spinning reel to be securely held
in position
-
The rod holder design
has a side mounting flange, which leaves the bottom open. This
allows for the rod holder to accommodate trigger sticks.
-
Pistol grip rod butts
easily clear the sides of the rod holder for quick rod retrieval.
-
Includes mounting bracket
and stainless steel hardware.
|
Part Number |
Price |
|
HD-ACC6 |
$28.00 + shipping |
|
Bench
Seat Pedestal
-
Can be added to
front or rear bench.
-
When the pedestal
seat is removed you will have the regular flat bench.
-
Hardware included
for easy installation.
|
Part Number |
Price |
|
PED |
$139.00 + shipping |
|
|

Wheel Dolly Jack
|
Part Number |
Price |
|
HD-ACC7 |
$74.00 + shipping |
|
|

Cup Holder
Includes Bracket
|
Part Number |
Price |
|
HD-ACC8 |
$6.00 + shipping |
|